Skip to content

WLANmaus interface configuration

This page describes how to configure the WLANmaus server in Traintastic.

Note

There is no setup wizard support for WLANmaus. Configuration must be done manually.

Overview

The WLANmaus protocol is used by Roco/Fleischmann WLANmaus handheld controllers and the Z21 mobile app. When enabled, Traintastic acts as a WLANmaus server that these throttles connect to over the network.

WLANmaus settings

  • Allow emergency stop – If enabled, the throttle can trigger an emergency stop for all locomotives.
  • Allow track power off – If enabled, the throttle can switch track power off.
  • Allow track power/release emergency stop – If enabled, the throttle can switch track power and release the emergency stop.

Need help or having issues?

If you encounter problems using WLANmaus with Traintastic, check the community forum. Sharing your findings helps others and improves Traintastic.