Supported hardware
This page lists command stations and digital systems that have been tested with Traintastic. Using the setup wizard is recommended whenever possible. If wizard support is not available, setup can still be done manually by creating and configuring the correct interface type.
For details on manual interface configuration, see the Interface configuration section.
Not on the list?
Your system may still work even if it isn’t listed here. Visit the community forum to see if others have tried it, or share your own experience to help extend this list.
Supported command stations
| Vendor / System | Interface type(s) | Notes |
|---|---|---|
| DCC-EX | USB, Network | - |
| Digikeijs DR5000 | USB, Network | - |
| ESU ECoS | Network | - |
| ESU ECoS 2 | Network | - |
| LDT HSI-88 | Serial | No wizard support. |
| Märklin CS2 | Network | - |
| Roco MultiMAUS | XpressNet | Requires a XpressNet interface. |
| Uhlenbrock Intellibox | LocoNet, Serial not supported | Requires a LocoNet interface. |
| Uhlenbrock IB-COM | USB | - |
Note
All systems listed here have been verified either with the setup wizard or through manual configuration. If you encounter issues with a listed system, please report them on the community forum so the documentation and wizard can be improved.
Untested command stations
These systems are expected to work with Traintastic, but have not yet been verified.
| Vendor / System | Interface type(s) | Wizard support | Notes |
|---|---|---|---|
| Digitrax LocoNet | Serial, USB, Network | No | Configure LocoNet interface manually. |
| Lenz XpressNet | Serial, USB, Network | No | Configure XpressNet interface manually. |
| Märklin CS3 | Network | Yes | - |
| Märklin CS3 plus | Network | Yes | - |
| Uhlenbrock Intellibox Basic | USB | Yes | - |
| Uhlenbrock Intellibox IR | LocoNet, Serial not supported | Yes | Requires a LocoNet interface. |
| Uhlenbrock Intellibox II | USB | Yes | - |
| Uhlenbrock Intellibox 2neo | USB | Yes | - |
| YaMoRC YD7001 | USB, Network | No | Similar to Digikeijs DR5000. |
| YaMoRC YD7010 | USB, Network | No | Similar to Digikeijs DR5000. |
| z21 start | Network | Yes | - |
| z21 white | Network | Yes | - |
| Z21 black | Network | Yes | - |
Share your success!
Have you successfully used one of these systems with Traintastic? Please share your experience on the community forum. Your feedback helps verify compatibility and improve this list for other users.
Unsupported command stations
These systems are currently not supported. Some lack sufficient technical documentation for implementation. Supported for others has not been developed due to missing hardware.
| Vendor / System | Interface Type(s) | Notes |
|---|---|---|
| BiDiB | USB, Network | - |
| Selectix | Serial | In development |
| VPEB Dinamo | Serial, USB | Track driver system |
Contributions are welcome!
Can you help improve support for these systems? Testing results, feedback, or legally obtained technical documentation are very welcome. Please share on the community forum.