Skip to content

Board tile reference

This page lists all available tiles for creating schematic drawings in Traintastic. Tiles can be placed on a board to represent track, signals, controls, and more.

Railway

Standard track

These tiles have no functions or settings.

Tile Name Description
StraightStraight Straight Straight track
Buffer stopBuffer stop Buffer stop End of track marker
TunnelTunnel Tunnel Decorative to indicate hidden track
Curve 45°Curve 45° Curve 45° Curved track (45 degrees)
Curve 90°Curve 90° Curve 90° Curved track (90 degrees)
Bridge 45° (L)Bridge 45° (L) Bridge 45° (left) Bridge piece angled left
Bridge 45° (R)Bridge 45° (R) Bridge 45° (right) Bridge piece angled right
Bridge 90°Bridge 90° Bridge 90° Bridge piece at 90 degrees

Turnouts

Tile Name Description
Turnout left 45°Turnout left 45° Turnout left 45° Turnout branching left at 45 degrees
Turnout left 90°Turnout left 90° Turnout left 90° Turnout branching left at 90 degrees
Turnout left curvedTurnout left curved Turnout left curved Curved turnout branching left
Turnout right 45°Turnout right 45° Turnout right 45° Turnout branching right at 45 degrees
Turnout right 90°Turnout right 90° Turnout right 90° Turnout branching right at 90 degrees
Turnout right curvedTurnout right curved Turnout right curved Curved turnout branching right
Turnout wyeTurnout wye Turnout wye Symmetric turnout (branches both ways)
Turnout 3-wayTurnout 3-way Turnout 3-way Turnout with three routes

Crossings

Tile Name Description
Crossover 45°Crossover 45° Crossover 45° Diagonal track crossing at 45 degrees
Crossover 90°Crossover 90° Crossover 90° Track crossing at 90 degrees
Single slipSingle slip Single slip Single-slip crossing
Double slipDouble slip Double slip Double-slip crossing

Control

Tile Name Description
BlockBlock Block Track block section
SensorSensor Sensor Occupancy or feedback sensor
One wayOne way One way Straight track allowing traffic in one direction only
Direction controlDirection control Direction control Straight track enforcing a given running direction
DecouplerDecoupler Decoupler Straight track with a decoupling function
NX buttonNX button NX button Route-setting button (part of NX interlocking operation)

Signaling

Tile Name Description
Signal 2-aspectSignal 2-aspect Signal (2 aspects) Basic signal with two states: red/green
Signal 3-aspectSignal 3-aspect Signal (3 aspects) Advanced signal with three states: red/yellow/green

Miscellaneous

Interaction

Tile Name Description
Push buttonPush button Push button Clickable button for manual actions
SwitchSwitch Switch On/off switch for manual control

Decoration and annotation

Tile Name Description
LabelLabel Label Text label for annotation

Tip

This is only a basic reference. Some tiles have additional properties and configuration options.